Once installed, the EZVIZ DBC1 functions as you’d expect a video doorbell to.
Ezviz app iphone install#
Unlike other smart doorbells, the faceplate is not secured with a security screw to prevent this access.Īll said and done, it shouldn’t take more than half an hour to install the doorbell and get it set up. As mentioned above, the faceplate does just clip off, allowing access to the reset button and QR code. Once I did that, the doorbell app setup went just fine. After the third attempt, I removed the faceplate and reset the doorbell. When first connecting to the app with the DB1C, I kept getting errors. Once physically installed, the doorbell will initialize, and you can then configure your alarm area and other relevant settings through the app. Installation of the EZVIZ DB1C Wi-Fi Video Doorbell is pretty straightforward. It will walk you through the physical installation process, including turning off the power to your doorbell and existing chime, adding a power kit to your chime, and mounting the doorbell.
Ezviz app iphone code#
To start the installation, scan the QR code sticker on the front of the manual. Installation of the EZVIZ DB1C is pretty straightforward. With the DB1C, the faceplate snaps off, allowing access to the QR code and reset button, allowing anyone to reset the device should they choose to. That one comes with three different colour faceplates, and the faceplate itself screws on, securing the microSD card, as well as hiding the QR code and internals. While there are enough components to install the doorbell, the DB1 came with more. The EZVIZ DB1C also has an IP65 weather rating and is rated for temperatures between -22☏ (-30☌) and 140☏ (60☌), so it should be good for most environments. Once installed on the appropriate bracket, the faceplate snaps on, and a security screw secures the main doorbell unit on the bottom of the doorbell. Two angled mounting brackets are also included to help with proper installation and placement. This has a cover that is screwed into place, protecting and securing the microSD card. Finally, on the right edge of the unit is a slot for a microSD card. The EZVIZ logo is printed between the middle and bottom circles. The microphone hole is beneath the camera assembly. The top circle houses the camera, and the bottom circle is the actual doorbell button. Rectangular in shape, it has rounded corners and is just over 5-inches high, about 1 3/4-inches wide, and just over 3/4-inches deep. The EZVIZ DB1C Wi-Fi Video Doorbell has a pretty nice and somewhat sleek design.
What’s included with the EZVIZ DB1C Wi-Fi Video Doorbell. 3x Color Face Plates (White, Black, Brown).5W Weatherproof IP65 Operating Conditions -30☌ to 60☌ (22☏ to 140☏ )b, Humidity 95% or less (non-condensing) Dimensions 28.3 x 46.3 x 19.3 mm (5.05 x 1.82 x 0.76 inch) Weight 102g (0.22lb) Certifications UL/FCC/CE/WEEE/REACH/RoHS Warranty 1-year limited What’s in the box 11a/b/g/n, 2.4 and 5 GHz dual bands Channel Bandwidth Supports 20 MHz Security 64 / 128-bit WEP, WPA / WPA2, WPA-PSK / WPA2-PSK Local Storage Supports microSD card (up to 128GB), H.264 / H.265 Cloud Storage EZVIZ Cloud Storage Sensor PIR Motion Detection Sensor Alarm Motion detection (with person-shape detection) Video Intercom Long-distance video two-way talk Power Supply AC 12V to 24V Power Consumption Max. Output: Built-in high-power speaker Wireless IEEE802.